CKPPV - FLEXANE 80 LIQUID RESIN
- MSDS: CKPPV
- Manufacturer: ITW DEVCON
- Product Name: FLEXANE 80 LIQUID RESIN
- National Stock Number: 8030-01-210-0170
Product Identification
Product ID:FLEXANE 80 LIQUID RESIN
MSDS Date:12/13/1993
FSC:8030
NIIN:01-210-0170
Status Code:A
Kit Part:Y
MSDS Number: CKPPV
Responsible Party
DANVERS, MA 01923
US
Emergency Phone: 1-508-777-1100
Info Phone: 1-508-777-1100
Cage: 16059
Contractor
Telephone: 1-508-777-1100
Cage: 16059
Ingredients
METHYLENEBIS(4-CYCLOHEXYL ISOCYANATE)
CAS: 5124-30-1
RTECS: HQ9250000
ACGIH TLV: 0.054 MG/M3;.005 PPM
RELATED POLYMERS OF ABOVE
CAS: 53170-03-9
Hazards
LD50 LC50 Mixture:ORAL LD50(RAT): >11,000 MG/KG
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: EXTREMELY IRRITATING. SKIN:
IRRITANT. INHALATION: MAY CAUSE RESPIRATORY IRRITATION OR ALLERGIC
REACTION. INGESTION: NO SPECIFIC DATA FOUND, BUT MAY BE EXPECTED TO
CAUSE GASTROINTESTINAL IRRITATI ON.EFFECTS OF CHRONIC OVEREXPOSURE:
PROLONGED OR REPEATED OVEREXPOSURE BY SKIN CONTACT OR INHALATION
CAN CAUSE SKIN IRRITATION AND SENSITIZATION, WITH ITCHING,
SWELLING, RASHES, AND/OR AN ASTHMA-LIKE RESPIRATORY REACTION ON
LATER EXPOSURE EXPOSURE EVEN TO VERY SMALL AMOUNTS OF AIRBORNE
ISOCYANATES.
Effects of Overexposure:EYES: MAY CAUSE BURNS OR PERMANENT DAMAGE.
SKIN: PICM CAN CAUSE REDNESS, SWELLING, PAIN, PROLONGED CONTACT
WITH PICM CAN CAUSE BLISTERING. INHALATION: MAY CAUSE DRY THROAT,
COUGHING, SHORTNESS OF BREA TH, CHEST TIGHTNESS .
Medical Cond Aggravated by Exposure:ASTHMA, BRONCHITIS, ALLERGIES, AND
OTHER RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO
ISOCYANATE VAPORS.
First Aid
First Aid:EYES: FLUSH EYE WITH CLEANWATER FOR AT LEAST 15 MINUTES
WHILE GENTLY HOLDING EYELIDS OPEN. GET IMMEDIATE ATTENTION. SKIN:
WASH THROUGHLY WITH SOAP AND WARM WATER. CONSULT A PHYSICIAN IF
IRRITATION D EVELOPS. INHALATION: REMOVE PATIENT TO FRESH AIR.
ADMINISTER OXYGEN IF BREATHING IS DIFFICULT. GET MEDIAL ATTENTION.
INGESTION: CONSULT A PHYSICIAN IMMEDIATELY. DO NOT INDUCE VOMITING.
Fire Fighting
Flash Point:>204.4C, 400.F
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS ANS PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:DURING A FIRE, IRRITATING AND/OR TOXIC
GASES OR MISTS MAY BE PRESENT AS A RESUT OF THERMAL DECOMPOSITION
OR COMBUSTION.
Accidental Release
Spill Release Procedures:SPILL CONTROL: PREVENT SKIN & EYE CONTACT.
ABSORB SPILL ON INERT COMPOUND; TRANSFER TO AN OPEN CONTAINER IN A
WELL VENTILATION AREA; TREAT WITH DILUTE OR HOUSEHOLD AMONIA FOR 24
HOURS. BEFORE DESPOSA L. DO NOT SEAL CONTAINERS. WASH AREA WITH
HEAVY DUTY DETERGENT.
Handling
Handling and Storage Precautions:STORE WELL CLOSED IN A COOL, DRY
PLACE. USE. PREVENT MATERIAL CONTACT WITH WATER OR MOISTURE.
ISOCYANATES REACT SLOWLY WITH WATER WITH RELEASE OF CARBON DIOXIDE,
A GAS; PRESSURE COULD BUILD UP IN MOI STURE-CONTAMINATED, CLOSED
CONTAINERS, CAUSING BURSTING.
Other Precautions:KEEP HANDS AWAY FROM EYES WHEN HANDLING MATERIAL OR
BEFORE WASHING AFTER USE. WASH THOROUGHLY AFTER USING, PARTICULARLY
BEFORE EATING OR SMOKING.
Exposure Controls
Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPERATURES
WITH GOOD VENTILATION. IN CASES OF POOR VENTILATION AND/OR AT
ELEVATED TEMPERATURES AN AIR SUPPLYING RESPIRATOR SHOULD BE USED.
Ventilation:PROVIDE ENOUGH VENTILATION TO KEEP AIRBORNE ISOCYANATE
BELOW TLV. GENERAL VENTILATION IS NORMALLY ADEQUATE FOR OCCASIONAL
USES IN OPEN AREA.
Protective Gloves:CHEMICAL RESISTANT RUBBER GLOVES.
Eye Protection:SAFETY GLASSES WITH SIDE SHIELDS OR SPLASHPROOF GOGGLES.
Other Protective Equipment:OTHER PROTECTIVE GEAR AS REQUIRED TO PREVENT
SKIN CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER USING, PARTICULARLY
BEFORE EATING OR SMOKING.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Boiling Pt:>148.9C, 300.F
Melt/Freeze Pt:M.P/F.P Text:N/D
Vapor Pres:N/D
Vapor Density:N/D
Spec Gravity:1.04
pH:7.0
Evaporation Rate & Reference:N/D
Solubility in Water:NIL
Appearance and Odor:CLEAR LIQUID WITH FAINT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
WATER OR MOISTURE CAN CAUSE RUPTURE OF CLOSED CONTAINES DUE TO PRESSURE
BUILDUP.
Stability Condition to Avoid:EXCESSIVE HEAT AND OPEN FLAME.
Hazardous Decomposition Products:OXIDES OF CARBON AND NITROGEN.
Disposal
Waste Disposal Methods:REMOVE TO A WASTE DESPOSAL FACILITY OPERATING IN
COMPLIANCE WITH STATE AND LOCAL REGULATIONS.
Toxicology
Toxicological Information:ORAL LD50 (RAT): >11,000 MG/KG. DERMAL LD50
(RABBIT)>10000 MG/KG. INHALATION LC50 (RAT): 28 PPM (DATA FOR PURE
PICM): EXPOSURE TIME: 4 HOURS.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Transport
Transport Information:PROPER SHIPPING NAME: NOT REGULATED. D.O.T.
HAZARD CLASS: NONE.
Regulatory
Federal Regulatory Information:APPLICABLE CERCLA/RCRA HAZARDOUS WASTE
CODES: NONE. REPORTABLE QUANTITY UNDER CERCLA, IN POUNDS: ---.